Description

5,000 PSI 5.0 GPM Cold Water Gas Pressure Washer with Honda GX690 Engine and Comet Belt Drive Triplex Pump on Roll Cage Frame The BE Power Equipment PE-5024HWEBCOM is a 5,000 PSI 5.0 GPM industrial-grade cold water gas pressure washer built for demanding commercial and industrial cleaning environments. Unlike the hand-truck frame units in the BE commercial range, the PE-5024HWEBCOM is built on a 204 4-Wheel Roll Cage Contractor Frame, a powder-coated steel roll cage design with an integrated lift point that allows the unit to be hoisted into position in rough industrial environments where conventional wheeled units cannot operate effectively. Powered by a Honda GX690 689cc V-twin electric start engine and paired with an industrial-grade Comet TW5050S belt-driven triplex pump, this unit delivers 5,000 PSI of cleaning pressure and 5.0 GPM of flow for heavy-duty industrial applications. At 406 lbs, this is a contractor-class machine designed to be placed and operated in a fixed or semi-fixed position — not transported by hand between cleaning tasks. The belt drive system reduces pump speed to 1,450 RPM, extending pump service life during continuous high-demand operation. The electric start and 55AH AGM deep cycle battery deliver reliable startup without a recoil pull, which is particularly useful on a unit of this weight and configuration. Built for Demanding Industrial Environments The PE-5024HWEBCOM is purpose-built for commercial and industrial applications where cleaning performance, durability, and access to difficult environments are the priority. The roll cage frame with integrated lift point makes this unit suitable for: Industrial facility cleaning and surface preparation Heavy equipment and fleet washing at fixed or semi-fixed locations Construction site cleanup and surface prep for coatings Agricultural and processing facility maintenance High-demand applications requiring sustained 5,000 PSI output With 5,000 PSI and 5.0 GPM, this unit delivers the pressure and flow for the most demanding cold water cleaning tasks across commercial and industrial settings. Features Honda GX690 V-Twin Electric Start Engine The PE-5024HWEBCOM is powered by the Honda GX690 689cc V-twin OHV electric start engine, a commercial-grade engine known for high-torque output, reliability, and long service life. The GX690’s V-twin configuration delivers the sustained power output required to drive a 5,000 PSI belt drive pump through extended cleaning sessions. The electric start system is supported by a 55AH AGM deep cycle battery, providing reliable engine startup without a recoil pull — a practical advantage on a 406 lb contractor unit where physical access to a recoil handle may be limited by the roll cage configuration. Engine features include: Electric start with 55AH AGM deep cycle battery Honda V-twin OHV design for high-torque, sustained output Automatic low-oil shutdown to protect the engine Proven Honda reliability for continuous professional use The Honda GX690 engine is covered under Honda’s separate engine warranty program. Industrial-Grade Comet TW5050S Belt-Driven Triplex Pump Paired with the Honda engine is an industrial-grade Comet TW5050S belt-driven triplex pump with an external unloader and adjustable injector. The belt drive reduces pump speed to 1,450 RPM, significantly lowering pump wear and extending service life during continuous heavy-duty use compared to direct drive configurations at similar output levels. Key pump features include: Belt drive system at 1,450 RPM for reduced wear and extended pump life External unloader for adjustable pressure control Adjustable injector for variable detergent concentration Smooth, consistent pressure delivery at 5,000 PSI Thermal relief valve to protect the pump during extended bypass operation 204 4-Wheel Roll Cage Contractor Frame with Lift Point The PE-5024HWEBCOM is built on a 204 4-Wheel Roll Cage Contractor Frame, a heavy-duty powder-coated steel roll cage structure designed for industrial environments. The roll cage provides full perimeter protection for the engine and pump assembly, and the integrated lift point allows the unit to be hoisted using appropriate lifting equipment — a critical feature for positioning a 406 lb machine in industrial facilities, loading docks, or elevated work areas. The 4-wheel configuration provides ground mobility across flat industrial surfaces, and the 12″ Ultra Premium Flat-Free tires eliminate the risk of flats when rolling across debris or rough ground. 50-Foot Steel Braided High-Pressure Hose The PE-5024HWEBCOM includes a 50′ x 3/8″ QC steel braided high-pressure hose with quick-connect fittings. The 3/8″ diameter supports the 5.0 GPM flow rate of this unit, and the steel braided construction provides abrasion resistance for extended industrial use. 36″ Insulated Gun and Wand Assembly The included 36″ QC insulated gun and wand assembly provides reach and comfort during extended cleaning sessions. The insulated wand reduces heat transfer to the operator, and the quick-connect system makes nozzle changes fast and straightforward. 4 Quick-Connect Spray Nozzles Four quick-connect nozzles are included to cover a range of cleaning applications: 15°: Focused, high-pressure spray for heavy surface cleaning and preparation 25°: General-purpose spray for equipment and surfaces 40°: Wide-angle rinse for vehicles and delicate surfaces Soap: Low-pressure nozzle for applying detergent through the adjustable injector 12″ Ultra Premium Flat-Free Tires The PE-5024HWEBCOM rolls on 12″ Ultra Premium Flat-Free tires that handle uneven ground and industrial debris without the risk of flats, providing reliable mobility when repositioning the unit within a facility or across a work site. Warranty and Factory Testing The PE-5024HWEBCOM is backed by a 3-year limited warranty from BE Power Equipment. The Honda GX690 engine is covered separately under Honda’s manufacturer warranty program. Each unit is functionally tested at the factory before shipping. Your pressure washer may arrive with minimal residual oil or fuel odor, which confirms the unit has passed quality testing and is ready for use. Product Specifications Pressure: 5,000 PSI Flow Rate: 5.0 GPM Engine: Honda GX690 689cc V-Twin OHV, Electric Start Battery: 55AH AGM Deep Cycle Battery Pump: Comet TW5050S Triplex, P3 Class, External Unloader, Adjustable Injector Drive Type: Belt Drive Pump RPM: 1,450 Frame: 204 4-Wheel Roll Cage Contractor Frame, Powder-Coated Steel with Integrated Lift Point Hose: 50′ x 3/8″ QC Steel Braided Rubber Hose Spray Wand: 36″ QC Insulated Gun/Wand Assembly Nozzles: 4 Quick-Connect, 15°, 25°, 40°, and Soap Wheels: 12″ Ultra Premium Flat-Free Tires Engine Oil Type: 10W-30 Pump Oil Type: 30W Non-Detergent Unit Weight: 406 lbs / 184.2 kg Unit Dimensions: 48.0″ x 32.0″ x 34.0″ Series: Industrial Safety Features: Automatic low-oil shutdown, thermal relief valve Warranty: 3-year limited (Honda GX690 engine covered separately by Honda) Factory Testing: Each unit is functionally tested before shipment. Minimal residual oil or fuel odor upon delivery is normal and confirms quality testing has been completed. Included in the Box 50′ x 3/8″ QC Steel Braided Rubber Hose 36″ QC Insulated Gun/Wand Assembly 15°, 25°, 40°, and Soaper QC Nozzles Built for Industrial Cleaning Work The BE Power Equipment PE-5024HWEBCOM is a contractor-class cold water gas pressure washer combining a Honda GX690 V-twin electric start engine, an industrial-grade Comet TW5050S belt drive triplex pump, and a heavy-duty roll cage frame with integrated lift point. At 5,000 PSI and 5.0 GPM, with a 406 lb roll cage build and electric start convenience, this unit is designed for the demanding fixed and semi-fixed industrial cleaning applications where standard portable units cannot deliver the same level of output and durability. PE-5024HWEBCOM — 5,000 PSI 5.0 GPM Cold Water Gas Pressure Washer with Honda GX690 Engine and Comet Belt Drive Triplex Pump on Roll Cage Frame.