Description

4,200 PSI 4.2 GPM Cold Water Gas Pressure Washer with Honda GX390 Engine and CP Belt Drive Triplex Pump on Aluminum Frame The BE Power Equipment B4213HABAS is an industrial-grade cold water gas pressure washer delivering 4,200 PSI at 4.2 GPM, combining a belt drive system, a CP CTB1S P8 industrial triplex pump, and a lightweight aluminum frame in a single package designed for continuous high-demand cleaning. As the only standard-frame belt drive unit in the BE cold water gas pressure washer range, the B4213HABAS bridges the gap between the standard direct drive lineup and the truck mount belt drive units. The belt drive system runs the pump at 1,450 RPM — significantly lower than the 3,450 RPM of direct drive configurations — reducing heat buildup, minimizing pump wear, and extending service life under continuous operation. Paired with the P8 industrial pump class, the B4213HABAS is built for operators who need direct drive PSI in a pump configuration engineered for sustained use. The 088A Aluminum Belt Drive Dealer Frame reduces the overall machine weight compared to steel frame alternatives while providing corrosion resistance for long-term use in outdoor and wet environments. Whether you’re cleaning concrete driveways, agricultural equipment, vehicles, or commercial facilities, the B4213HABAS is engineered to perform where dependable, long-running equipment is essential. Built for Demanding Industrial Cleaning The B4213HABAS is classified as an Industrial series pressure washer, suited for high-frequency, continuous-duty commercial and industrial cleaning applications including: Commercial and industrial facility maintenance Agricultural and heavy equipment cleaning Fleet and vehicle washing Concrete, stone, and hard surface cleaning Construction site cleanup and surface preparation Features Honda GX390 Engine At the heart of the B4213HABAS is the Honda GX390 389cc recoil start engine, a commercial-grade overhead valve engine known for durability, consistent output, and long service life. Key engine features include: Reliable recoil start and smooth operation High-torque output suited for belt drive applications Automatic low-oil shutdown to protect the engine Fuel-efficient OHV design for extended runtime 6.1 L / 1.6 GAL fuel tank for extended operation between refueling The Honda GX390 engine is covered under Honda’s separate engine warranty program. Belt Drive System for Extended Pump Life The B4213HABAS uses a gas belt drive system to power the CP triplex pump, running the pump at 1,450 RPM — less than half the operating RPM of direct drive configurations. This lower pump speed delivers several meaningful advantages for continuous-duty use: Reduced heat buildup during extended operation Lower pump wear for extended service life Smoother, more consistent pressure output Improved reliability for high-frequency cleaning applications Industrial-Grade CP CTB1S Triplex Pump with External Unloader Paired with the Honda engine via the belt drive system is an industrial-grade CP CTB1S P8 class triplex pump with external unloader and adjustable injector. At P8 class, this pump is rated for the most demanding sustained cleaning applications in the BE standard frame lineup. Key pump features include: P8 industrial pump class for high-frequency, high-demand cleaning Belt drive operation at 1,450 RPM for reduced wear and extended service life Thermal relief valve to prevent overheating during extended bypass operation Smooth, consistent pressure delivery at 4,200 PSI External Unloader with Adjustable Injector The external unloader regulates water flow and pressure when the trigger gun is released, redirecting water flow in bypass mode to keep the pump cool during extended operation. The adjustable injector allows you to dial in detergent concentration to match different surfaces and cleaning applications, giving you greater flexibility than a fixed injector configuration. 088A Aluminum Belt Drive Frame The B4213HABAS is built on the 088A Aluminum Belt Drive Dealer Frame — a purpose-built platform designed to house the belt drive system while reducing overall machine weight compared to steel frame alternatives. Aluminum construction resists corrosion for long-term use in outdoor and wet environments without the weight penalty of steel. The frame includes onboard storage for the hose, wand, and nozzles, with stabilizing feet for stable operation. 50-Foot x 3/8″ Steel Braided High-Pressure Hose The included 50′ x 3/8″ QC single wire braided rubber hose provides durability and extended reach for cleaning large areas without repositioning the machine. The 3/8″ diameter supports the full 4.2 GPM flow rate of this unit. 36″ Insulated Spray Wand and Trigger Gun A 36″ QC insulated spray wand provides reach and control for high, low, and hard-to-reach cleaning angles. The insulated design reduces heat transfer to the operator during prolonged use, and the quick-connect system makes nozzle changes fast and straightforward. 4 Quick-Connect Spray Nozzles Four quick-connect nozzles cover a full range of cleaning applications: 15°: Heavy-duty cleaning and surface stripping 25°: General-purpose washing 40°: Rinsing or cleaning delicate surfaces Soap: Applying detergents and degreasers through the adjustable injector 12″ Ultra Premium Flat-Free Tires The 12″ Ultra Premium flat-free tires roll easily over gravel, dirt, and uneven terrain without requiring air inflation, improving portability and jobsite mobility. Safety Features Automatic low-oil shutdown: Turns off the engine if oil drops below a safe operating level Thermal relief valve: Releases built-up heat from the pump during extended idle or bypass operation Warranty and Factory Testing The B4213HABAS is backed by a 3-year limited warranty from BE Power Equipment. The Honda GX390 engine is covered separately under Honda’s manufacturer warranty program. Each unit is functionally tested at the factory before shipping. Your pressure washer may arrive with minimal residual oil or fuel odor, which confirms the unit has passed quality testing and is ready for use. Product Specifications Pressure: 4,200 PSI Flow Rate: 4.2 GPM Engine: Honda GX390 389cc OHV, Recoil Start Pump: CP CTB1S Triplex, P8 Class, External Unloader, Adjustable Injector Drive Type: Gas Belt Drive RPM: 1,450 Frame: 088A Aluminum Belt Drive Dealer Frame with Onboard Accessory Storage Hose: 50′ x 3/8″ QC Single Wire Braided Rubber Hose Spray Wand: 36″ QC Insulated Gun/Wand Assembly Nozzles: 4 Quick-Connect, 15°, 25°, 40°, and Soap Wheels: 12″ Ultra Premium Flat-Free Tires Fuel Tank: 6.1 L / 1.6 GAL Engine Oil Type: 10W-30 Pump Oil Type: 30W Non-Detergent Unit Weight: 164 lbs / 74.4 kg Unit Dimensions: 34.0″ x 28.0″ x 26.0″ Series: Industrial Safety Features: Automatic low-oil shutdown, thermal relief valve Warranty: 3-year limited (Honda GX390 engine covered separately by Honda) Factory Testing: Each unit is functionally tested before shipment. Minimal residual oil or fuel odor upon delivery is normal and confirms quality testing has been completed. Included in the Box 50′ x 3/8″ QC Single Wire Braided Rubber Hose 36″ QC Insulated Gun/Wand Assembly 15°, 25°, 40°, and Soaper QC Nozzles Engine Oil, Funnel, and Spark Plug Wrench Industrial Belt Drive Performance on an Aluminum Frame The BE Power Equipment B4213HABAS delivers 4,200 PSI of industrial cleaning performance through a belt drive system engineered for sustained operation. With a Honda GX390 389cc engine, a CP CTB1S P8 industrial triplex pump running at 1,450 RPM, and a lightweight aluminum frame, this unit is built for operators who need the extended service life of belt drive technology in a portable, stand-alone platform. B4213HABAS — 4,200 PSI 4.2 GPM Cold Water Gas Pressure Washer with Honda GX390 Engine and CP Belt Drive Triplex Pump on Aluminum Frame.