Description

$500 END USER REBATE All in One Take on more projects with one machine that has MIG, Stick, AC and DC TIG. QuickTech™ Automatically determines the polarity. MIG gun and TIG torch can stay connected at the same time. Automatically switches to the right process. Just hit the trigger or the foot control and the machine automatically changes. Automatically recalls the settings from the last process used. 14-Pin Controlled Operator Alternatives The standard 14-pin connector lets you choose your control for a customized experience, whether it’s a foot control, fingertip control, or wireless foot control. Weighing Only 56 Pounds The Multimatic® 220 AC/DC can go where the work is, plus the added convenience of one machine versus two or more. Dependable Arc Starts Provides High-Frequency, non-contact arc starting to eliminate tungsten and material contamination time after time. Multimatic® 220 AC/DC Wireless Foot Control System (301580) 6.5 ft (2 m) power cord and MVP™ adapter plugs for 120V and 240V 10 ft MDX™-100 MIG Welding Gun 13 ft (4 m) cable electrode holder and 25 mm Dinse-style connector 12.5 ft (3.8 m) Weldcraft™ A-150 (WP-17) TIG torch with 25mm Dinse-style connector 10 ft (3 m) work cable with clamp and 25 mm Dinse-style connector Two Argon and AR/CO2 mix regulator/flow gauge with hoses Spool of Hobart® .030 in (0.8 mm) solid wire Two contact tips for .030 in (0.8 mm) wire Quick Select™ drive roll for .024 in (0.6 mm) or .030/.035 in (0.8/0.9 mm) solid wire, and .030/.035 (0.8/0.9 mm) flux cored wire AK2C TIG torch accessory kit Material thickness gauge #229895 Hook-and-loop cord wraps 6010 Stick Electrode Capability Superior Stick arc performance even on the difficult-to-run electrodes like E6010. Auto-Set™ Technology Offers predefined weld settings to increase ease of use and ensure that the job is done right for operators of all skill levels. Generator Compatible Will be able to operate and provide full output when powered by an engine-driven welder with 10000 Watt (10K) output or higher, such as a Miller Bobcat or Trailblazer. Limited output will occur when used with smaller generators. Multi-voltage plug (MVP™) Multi-voltage plug (MVP) allows connection to common 120 or 240 V power receptacles without the use of any tools— simply choose the plug that fits the receptacle and connect to the power cord. Pro-Set™ Feature This feature eliminates the guesswork when setting weld parameters. Use Pro-Set when you want the speed, convenience and confidence of pre-set controls. Simply select the feature and adjust until Pro-Set appears on the display. The Pro-Set feature is available for Balance, Frequency, Pulse and DIG parameters. Learn More